Description
Descriptions
The enclosures of full plastic explosion-proof (emergency) fluorescent light fittings (pole mounting) are manufactured by glass fiber reinforced polyester and the transparent parts are manufactured by anti-ultraviolet polycarbonate. They have good protection ability from various chemical matters in factories or offshore platform because of high stability and mechanical strength. The material of the light fitting used can prevent from being corroded effectively. The sealing bars between the enclosure and transparent parts are compacted by the interlock device. The isolation switches are operated by the interlock devices. When the isolation switch is switched off, the covers can be opened. The explosion-proof electronic ballast, explosion-proof isolation switch, explosion-proof lampholder and explosion-proof terminals etc are mounted inside of the full plastic explosion-proof fluorescent light fittings (pole mounting).
The explosion-proof electronic ballast, explosion-proof inverter, explosion-proof fuse, explosion-proof indicator lamp, and high temperature resistance explosion-proof battery etc. are mounted inside of the full plastic explosion-proof emergency fluorescent light fittings. The light fitting can be automatically recharging while normal working, so that the lamp tube will turn on automatically when the power loses because of accident or power failure.
- Full plastic explosion-proof fluorescent light fittings mounting ways: Ceiling type, chain type, pendant type, wall type and clamp type.
- Full plastic explosion-proof fluorescent light fittings mounting ways: Platform fence type, platform flange type, street lamp type.
- Standard two-supply circuit design and EOL switching off function design when the life of the lamp tube is end;
- The structural design is never distortion and its protection degree is up to IP66
- Equipped with the mechanical interlocking device and explosion-proof distance switch of II C class to enable the power off automatically when the diffuser is uncovered.
- With interlock device, the transparent parts and enclosure can not energize to work to ensure safe use before completely sealing.
- The explosion-proof ballast and explosion-proof inverter are certified separately;
- The explosion-proof ballast is equipped with the protective functions of open circuit, short circuit and abnormity of lamp tube;
- The emergency type has the indication of fault signal, the charging signal, the discharging signal
- International IECEx Approval, Europe union ATEX Approval
Diagram
Mounting circuit diagram for emergency light fittings
Luminous intensity distribution curve
CZ0865, CZ0866 Full plastic explosion-proof fluorescent light fittings
Product characteristics
CZ0865, CZ0866 YJ Full plastic explosion-proof emergency fluorescent light fittings
Product characteristics
CZ0865/2 x 14W(18W), CZ0866/2 x 28W(36W)
Full plastic explosion-proof fluorescent light fittings
Main Technical Data
Certification | Ex mark | Meet the standard
China (PCEC Ex) | Ex deq II C T4 Gb DIP A21 TA, T6 (Product without fuse) | GB3836 GB12476 |
China (PCEC Ex) | Ex deqmb II C T4 Gb DIP A21 TA, T6 (Product with fuse) | GB3836 GB12476 |
IECEx | Ex deq II C T4 Gb Ex tD A21 T 80°C (Product without fuse) | IEC60079 |
IECEx | Ex deqmb II C T4 Gb Ex tD A21 T 80°C (Product with fuse) | IEC60079 |
ATEX | Ex II 2GD Ex deq II C T4 Gb Ex tD A21 T80°C (Product without fuse) | EN60079 |
ATEX | Ex II 2GD Ex deqmb II C T4 Gb Ex tD A21 T80°C (Product with fuse) | EN60079 |
Intended use: Can be used in zone 1 and zone 2, Can be used in zone 21 and zone22
Ambient temperature use: -25°C ≤ Ta ≤ 40°C
Degree of protection: IP66
Rated voltage: 110~240V AC(± 10%) 50/60Hz
Power factor: λ > 0.98
Energy efficiency index EEI = A2
Terminals: L, N, PE, each terminal 2 x 1.5-10mm2
Cable entry: Moulded plastic 1 x M25 x 1.5 cable gland,
Outside diameter of cable: ϕ8-17mm
Moulded plastic 2 x M25 x 1.5 stopping plugs
Order specifications
Code of cable gland
Code | Specifications | Cable diameter |
B | One moulded plastic M25 x 1.5 cable gland, two moulded plastic M25 x 1.5 stopping | ϕ8-17mm |
C | One brass CZ0221/M25 x 1.5 metal cable gland, two moulded plastic M25 x 1.5 stopping plugs | ϕ8-17mm |
D | Two moulded plastic M25 x 1.5 cable glands, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
E | Two brass CZ0221/M25 x 1.5 metal cable glands, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
F | One brass CZ0227/M25 x 1.5-G3/4” increased safety metal cable gland, two moulded plastic M25 x 1.5 stopping plugs | ϕ11-15mm |
G | Two brass CZ0227/M25 x 1.5-G3/4” increased safety cable glands, one moulded plastic M25 x 1.5 stopping plug | ϕ11-15mm |
H | One brass CZ0226/M25 x 1.5(G02) increased safety metal cable gland (stopping boxes), two moulded plastic M25 x 1.5 stopping plugs | ϕ11.5-16mm |
I | Two brass CZ0226/M25 x 1.5(G02) increased safety metal cable glands (stopping boxes), one moulded plastic M25 x 1.5 stopping plug | ϕ11.5-16mm |
CZ0865/2 x 14W(18W), CZ0866/2 x 28W(36W) Full plastic explosion-proof fluorescent light fittings (Pole Mounting)
Main Technical Data
Certification | Ex mark | Meet the standard
China (PCEC Ex) | Ex deq II C T4 Gb DIP A21 TA, T6 (Product without fuse) | GB3836 GB12476 |
China (PCEC Ex) | Ex deqmb IIC t4 Gb DIP A21 TA, T6 (Product with fuse) | GB3836 GB12476 |
Intended use: Can be used in zone 1 and zone 2, Can be used in zone 21 and zone 22
Ambient temperature use: -25°C ≤ Ta ≤ 40°C
Degree of protection: IP66
Rated voltage: 110~240V AC(± 10%) 50/60Hz
Power factor: λ > 0.98
Energy efficiency index EEI = A2
Terminals: L, N, PE, each terminal 2 x 1.5-10mm2
Cable entry: Moulded plastic 1 x M25 x 1.5 cable gland,
Outside diameter of cable: ϕ8-17mm
Order specifications
Diagram
CZ0865/2 x 14W(18W) YJ, CZ0866/2 x 28W(36W) YJ
Full plastic explosion-proof emergency fluorescent light fittings
Main Technical Data
Certification | Ex mark | Meet the standard
China (PCEC Ex) | Ex deqmb II C T4 Gb DIP A21 TA, T6 | GB3836 GB12476 |
IECEx | Ex deqmp II C T4 Gb Ex tD A21 T 80°C | IEC60079 |
ATEX | Ex II 2GD Ex deqmb IIC T4 Gb Ex tD A21 T 80°C | EN60079 |
Intended use: Can be used in zone 1 and zone 2, Can be used in zone 21 and zone 22
Ambient temperature use: -25°C ≤ Ta ≤ 40°C
Degree of protection: IP66
Rated voltage: 110~240V AC(± 10%) 50/60Hz
Power factor: λ > 0.98
Energy efficiency index EEI = A2
Recharging time: 24 h
Emergency starting time: 0.1 (S)
Emergency illuminating time: > 120 (min)
Terminals: L1, L2, L, N, PE, each terminal 2 x 1.5-10mm2
Cable entry: Moulded plastic 1 x M25 x 1.5 cable gland,
Outside diameter of cable: ϕ8 – 17mm
Moulded plastic 2 x M25 x 1.5 stopping plugs
Order specifications
Code of cable gland
Code | Specifications | Cable diameter |
B | One moulded plastic M25 x 1.5 cable gland, two moulded plastic M25 x 1.5 stopping plugs | ϕ8-17mm |
C | One brass CZ0221/M25 x 1.5 metal cable gland, two moulded plastic M25 x 1.5 stopping plugs | ϕ8-17mm |
D | Two moulded plastic M25 x 1.5 cable glands, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
E | Two brass CZ0221/M25 x 1.5 metal cable glands, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
F | One brass CZ0227/M25 x 1.5-G3/4” increased safety metal cable gland, two moulded plastic M25 x 1.5 stopping plugs | ϕ11-15mm |
G | Two brass CZ0227/M25 x 1.5-G3/4” increased safety cable glands, one moulded plastic M25 x 1.5 stopping plug | ϕ11-15mm |
H | One brass CZ0226/M25 x 1.5(G02) increased safety metal cable gland (stopping boxes), two moulded plastic M25 x 1.5 stopping plugs | ϕ11.5-16mm |
I | Two brass CZ0226/M25 x 1.5(G02) increased safety metal cable glands (stopping boxes), one moulded plastic M25 x 1.5 stopping plug | ϕ11.5-16mm |
CZ0865/2 x 14W(18W) YJ, CZ0866/2 x 28W(36W) YJ
Full plastic explosion-proof emergency fluorescent light fittings (Pole Mounting)
Main Technical Data
Certification | Ex mark | Meet the standard
China (PCEC Ex) | Ex deqmb II C T4 Gb DIP A21 TA, T6 | GB3836 GB12476 |
Intended use: Can be used in zone 1 and zone 2, Can be used in zone 21 and zone 22
Ambient temperature use: -25°C ≤ Ta ≤ 40°C
Degree of protection: IP66
Rated voltage: 110~240V AC(± 10%) 50/60Hz
Power factor: λ > 0.98
Energy efficiency index EEI = A2
Recharging time: 24 h
Emergency starting time: 0.1 (S)
Emergency illuminating time: > 120 (min)
Terminals: L1, L2, L, N, PE, each terminal 2×1.5-10mm2
Cable entry: Moulded plastic 1 x M25 x 1.5 cable gland,
Outside diameter of cable: ϕ8-17mm
Order specifications
Diagram
Accessories of mounting
Spare parts
Mounting ways and outline dimensions