Description
CZ0878d/LED Explosion-proof
floodlight light fittings (street light fittings)
Descriptions
The enclosures of LED explosion-proof floodlight fittings are manufactured of die-cast aluminum alloy, with epoxy resin powder sprayed on the surfaces. Therefore, they have good anti-corrosion performance. The transparent shield is made by the toughened glass borosilicate, and the exposed fasteners are made of stainless steel. Explosion-proof light fitting’s terminal box bottom entry, is suitable for rubber-coated and the armored cable wiring. The internationally certified PHOENIX cage type terminals are selected as the internal terminals, which are convenient for wiring. Cree LED pellets inside form light source modules through professional optics distribution. Heat disposal which is designed with thermology analysis and the heat-conducting structure of specially made aluminum base board ensure good operational heat release. It can satisfy the related requirements of illumination in petrochemical, chemical and marine industries.
Explosion-proof light fittings can be sorted as: floodlight type lamp and street type lamp.
- It is energy-saving and environmental protection which the power consumption is only 19% of the same brightness of incandescent lamp.
- It is long life and maintenance-free which the service life is up to 50000 hours and the maintenance free of long term
- There is a feature of good electromagnetic compatibility and it does not cause interference to the system power grid
- It is not influenced by the voltage fluctuations and can be operated in the wide voltage range of 200 ~ 240V AC
- There is a good performance of vibration due to the LED is the solid-state light source
- There is a wide range of ambient temperature, which can be operated in the ambient temperature range of -40°C ~ +55°C.
- The degree of protection is up to IP66
- It is convenient to be mounted and maintained
- International IECEx Approval, Europe union ATEX Approval
Main Technical Data
Certification | Ex mark | Meet the standard
China (CQST Ex) | Ex de II B T6/T5 Gb DIP A21 TA, T6/T5 | GB3836 GB12476 |
IECEx | Ex de II B T* Gb Ex t IIIC T* °C Db (In certification) |
IEC60079 |
ATEX | Ex II 2 GD Ex de II B T* Gb Ex t IIIC T* °C Db (In certification) |
EN60079 |
Intended use: Can be used zone 1 and zone 2, Can be used in zone 21 and zone 22
Degree of protection: IP66
Rated voltage: 200V~240V AC 50/60Hz
Ambient temperature: -20°C to +40°C / +55°C
-40°C to +40°C / +55°C
Terminal: L1, N cage type terminal 2-2.5mm2, PE terminal: 2x10mm2
Cable entry: (Standard configuration) Moulded plastic 1 x M25 x 1.5,
Outside diameter: ϕ8-17mm
Moulded plastic 1 x M25 x 1.5 stopping plug
Order specifications
Code of cable gland
Code | Specification | Cable diameter |
B | One moulded plastic M25 x 1.5 cable gland, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
C | One brass CZ0221/M25 x 1.5 metal cable gland, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
D | Two moulded plastic M25 x 1.5 cable glands | ϕ8-17mm |
E | Two brass CZ0221/M25 x 1.5 metal cable glands | ϕ8-17mm |
F | One brass CZ0227/M25 x 1.5-G3/4” increased safety metal cable gland, one moulded plastic M25 x 1.5 stopping plug | ϕ11-15mm |
G | Two brass CZ0227/M25 x 1.5-G3/4” increased safety metal cable glands | ϕ11-15mm |
H | One brass CZ0226/M25 x 1.5-(G02) increased safety metal cable gland (stopping boxes), one moulded plastic M25 x 1.5 stopping plug | ϕ11.5-16mm |
I | Two brass CZ0226/M25 x 1.5-G02 increased safety metal cable glands (stopping boxes) | ϕ11.5-16mm |
Accessories for street type lamp below.
Luminous intensity distribution curve
Accessories for street type lamp
CZ0930 The order No. of explosion-proof terminal box
Outline and installation dimensions
Mounting ways and outline dimensions
Base diagram
CZ0878d Explosion-proof floodlight light fittings
Descriptions
The enclosures of explosion-proof floodlight light fitting are manufactured in die-cast aluminum alloy with epoxy resin powder sprayed on the surface, so that they have good anti-corrosion performance. The transparent shield is made by the toughened glass of borosilicate, and the exposed fasteners are the stainless steel. The high purity aluminum reflector with broad illuminated area and high-brightness is mounted in. Explosion-proof light fitting’s terminal box side entry is suitable for rubber-coated and the armored cable wiring. The internationally certified cage type terminals of PHOENIX are selected as the internal terminals, which are convenient for wiring. The electric appliances such as metal halide lamp, high pressure sodium vapor lamp, electromagnetic induction energy saving lamp, ballast and trigger can be mounted inside. It can satisfy the requirements in petrochemical, chemical and marine industries.
- The degree of protection is up to IP66
- The bulbs of metal halide lamp and high pressure sodium vapor lamp have the function of shockproof protection.
- There is a scale panel on the mounting bracket
- It is convenient to be mounted and maintained
- International IECEx Approval, Europe union ATEX Approval
Main Technical Data
Certification | Ex mark | Meet the standard
China (CQST Ex) | Ex de II B T* DIP A21 TA, T* | GB3836 GB12476 |
IECEx | Ex de II B T* Gb Ex t IIIC T* °C Db (In certification) |
IEC60079 |
ATEX | Ex II 2 GD Ex de II B T* Gb Ex t IIIC T* °C Db (In certification) |
EN60079 |
Intended use: Can be used in zone 1 and zone 2, Can be used in zone 21 and zone 22
Degree of protection: IP66
Rated voltage: 220V AC 50Hz
220V AC, 230V AC, 240V AC 50Hz, 60Hz
Ambient temperature: -20°C to +40°C / +55°C
-40°C to +40°C / +55°C
Terminal: L1, N cage type terminal 2-2.5mm2, PE terminal: 2 x 10mm2
Cable entry: (Standard configuration) Moulded plastic 1 x M25 x 1.5,
Outside diameter: ϕ8-17mm
Moulded plastic 1 x M25 x 1.5 stopping plug
Order specifications
Code of cable gland
Code | Specification | Cable diameter |
B | One moulded plastic M25 x 1.5 cable gland, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
C | One brass CZ0221/M25 x 1.5 metal cable gland, one moulded plastic M25 x 1.5 stopping plug | ϕ8-17mm |
D | Two moulded plastic M25 x 1.5 cable glands | ϕ8-17mm |
E | Two brass CZ0221/M25 x 1.5 metal cable glands | ϕ8-17mm |
F | One brass CZ0227/M25 x 1.5-G3/4” increased safety metal cable gland, one moulded plastic M25 x 1.5 stopping plug | ϕ11-15mm |
G | Two brass CZ0227/M25 x 1.5-G3/4” increased safety metal cable glands | ϕ11-15mm |
H | One brass CZ0226/M25 x 1.5-(G02) increased safety metal cable gland (stopping boxes), one moulded plastic M25 x 1.5 stopping plug | ϕ11.5-16mm |
I | Two brass CZ0226/M25 x 1.5-G02 increased safety metal cable glands (stopping boxes) | ϕ11.5-16mm |
Spare parts of light source
Luminous intensity distribution curve
Outline and installation dimensions
Accessories of mounting accessories
CZ0877d Explosion-proof projecting light fittings
Descriptions
For the explosion-proof projecting light fitting, the explosion-proof light fittings and the explosion-proof ballast are formed to be one part, the enclosure of which is manufactured in die-cast aluminum alloy. The surfaces of the bodies are sprayed epoxy resin powder, so that it has good anti-corrosion performance. The transparent shield is made by the toughened glass, borosilicate and the exposed fasteners are stainless steel. Explosion-proof light fitting within high-purity aluminum reflector has good results of projecting light and high brightness through precise optical design. The segregable design of the explosion-proof light fitting and explosion-proof ballast causes a better heat elimination effect. It can satisfy the requirements of illumination in petrochemical, chemical and marine industries.
- The highest class of flameproof is up to IIC
- The degree of protection is up to IP66
- The bulb has the function of shock protection
- The explosion-proof ballasts can be mounted separately
- There is a scale panel on the mounting bracket
- It is convenient to be mounted and maintained
Luminous intensity distribution curve
Main Technical Data
Certification | Ex mark | Meet the standard
China (CQST Ex) | Ex de II C T3 DIP A21 TA, T3 (Explosion-proof light fittings) |
GB3836 GB12476 |
China (CQST Ex) | Ex d II C T* DIP A21 TA, T* (Explosion-proof ballasts) |
GB3836 GB12476 |
Intended use: Can be used in zone 1 and zone 2, Can be used in zone 21 and zone 22
Degree of protection: IP66
Rated voltage: 220V AC 50Hz
220V AC, 230V AC, 240V AC 50Hz, 60Hz
Ambient temperature: -40°C ≤ Ta ≤ 50°C
Terminal: L1, N cage type terminal 2-2.5mm2, PE terminal: 2 x 10mm2
Cable entry: 3 x G3/4“, Outside diameter: ϕ8-11.5mm
Order specifications
Spare parts of light source
Outline and installation dimensions