Details Application Designed for Explosive Atmospheres Zone 1 and Zone 2;

Designed for Combustible Dust Zone 21 and Zone 22;

Designed for IIA, IIB Groups Explosive Atmospheres;

Designed for Temperature Classifications T1~T5 ;

T8 Bi-Pin Tube as Lamp;

Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage, Chemical, Pharmaceuticals, Military Industries, Etc. Model Code Ordering References The Lamp is Included Inside

Certified Authentic With Complete Certificate


Model Code

Ordering References

The Lamp is Included Inside When Delivery;

Only One Tube Works Under Emergency Conditions;

For Example: If Need Pendant Type BPY Explosion Proof Fluorecsent Light Fitting, 2X40 Fluorescent Tubes with Emergency Unit, the Model Shall Be: BPY-40gJ.

Selection Table




Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting;

High Strength Toughened Glass Cover;

Exposed Fasteners are of Stainless Steel with Strong Corrosion Resistance;

Light Fitting with Grids Adjusts Lighting Efficiency and Reduces Glare;

Use Brand Tubes with Long Service Life and High Lighting Efficiency;

Modular Plug-In Design Only Need to Open End Cover and Pull Out Core to Change Tubes;

Light Fitting with Emergency Unit Will Automatically Shift to Emergency Lighting When Power Circuit is Failed;

Over Charging and over Discharging Protection Circuit Inside the Emergency Unit;

Power Factor Can be over 0.95 After Installing Compensation Capacitors;

Steel Pipe or Cable Wiring.

Technical Parameters

Compliance With: GB 3836.1, GB 3836.2, GB12476.1, GB12476.5, IEC60079-0, IEC60079-1, IEC 61241-0,IEC 61241-1;

Explosion Protection: Ex d IIB T4 Gb (fluorescent lamo); Ex tb IIIC T130℃;  Ex db IIb T6 Gb (LED lamp); Ex tb IIIC T80℃ Db  Ip66(LED lamp)

Rated Voltage:

Fluorescent Tube: AC 220V, 50Hz;

LED Tube: AC 220V, 50Hz/60Hz;

Lamp: T8 Bi-Pin Tubes (1X18W, 2X18W, 1X30W, 2X30W, 1X36W, 2X36W);

LED (1 X 9W; 2 X 9W; 1 X 18W; 2 X 18W)

Ingress Protection: IP66;

Corrosion Resistance: WF1;

Cable Entry: G1/2″

Cable Outer Diameters: Φ6mm~Φ10mm;

Emergency Parameters:

Battery Charging Time: ≤24h;

Emergency Starting Time: ≤0.25s

Emergency Lighting Duration: ≥90min

Dimensions & Photometry

Outline & Mounting Dimensions