Description
Warom BAYD 85 Series Explosion-proof Emergency Exit Light Fittings
◆ Explosion Protection to EN,IEC
◆ Can be used in Zone 1,2,21,22 Class1
◆ Lighting both in normal condition and emergency condition; When power supply is cut off, the emergency device starts to work; with overcharge, overdischarge protection and short circuit protection.
◆ With test pushbutton, convenient to check the emergency function. Press the test pushbutton, the light will switch into emergency condition.
◆ Ultra-bright LED lamp, low power consumption and long service life up to 50,000 hours; energy saving and environmental protection.
◆ Enclosure in Copper-free Aluminium Alloy, powder coated surface, yellow (RAL 1021).
◆ Toughened glass sheet resistant to temperature changes.
Specification
| Global (IECEx) | IECEx CQM 16.0032X |
| Gas and dust | Ex d IIC T6 Gb
Ex d IIB T80℃ Db IP66 |
| Europe (ATEX) | EPT 16 ATEX 2558X |
| Gas and dust | 
II 2 G Ex d IIC T6 Gb
|
| Certificates | IECEx; ATEX; CU-TR |
| Conformity to standards | EN; IEC |
| Degree of protection | IP66/IP67 |
Data
| Enclosure | Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021) |
| Exposed fastener | Stainless steel |
| Rated voltage | 100~300V AC 50/60Hz |
| Lamp | LED lamp (working voltage DC 3.6V) |
| Power consumption | 4W |
| Emergency time | 180min |
| Rated capacity | 800mAh |
| Charging time | 24h |
| Earthing protection | M5 (internal & external earth bolts) |
| Ambient temperature | -20℃~+55℃ |
| Terminal | 3 x 1.5~2.5mm² (L+N+PE) |
| Cable entries | 2 x M25 x 1.5 plugs |
| Cable gland | DQM-II (Ex d) or DQM-III (Ex d) is recommended. |
| Weight | 5.15kg |
Technical Parameters
